Getting Started; Setting Up - Panasonic KX-TGE463 Operating Instructions Manual

Setting up

Connections
R If you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 19).
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226.
3
4
5
1
2
For assistance, please visit http://shop.panasonic.com/support
TGE46x47x(en)_1117_ver061.pdf
n Charger
Battery installation
R USE ONLY rechargeable Ni-MH batteries
R Do NOT use alkaline/manganese/Ni-Cd
R Confirm correct polarities (
4
R Follow the directions on the display to set
11

Getting Started

Connect the AC adaptor to the power
outlet.
1
AAA (R03) size ( ).
batteries.
1
up the unit.
2015/11/17 15:14:12
1
, ).
11