Making/Answering Calls Using The Base Unit; Making Cellular Calls; Making Landline Calls; Answering Calls - Panasonic KX-TGE463 Operating Instructions Manual

Making cellular calls

Available for:
KX-TGE470 series (page 4)
Important:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 15).
1
Press MCELL 1N or MCELL 2N.
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 44), press MCELLN
handset. a MbN: Select the desired
cellular phone. a MSELECTN a Press
MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Adjusting the speaker volume
Press MjN or MkN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
Redialing the last number dialed
1
Press MCELL 1N or MCELL 2N.
For assistance, please visit http://shop.panasonic.com/support
TGE46x47x(en)_1117_ver061.pdf

Making/Answering Calls Using the Base Unit

2

Making landline calls

1
2
3
4
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
– If the handset is on the base unit, simply
Redialing the last number dialed
MZN a MREDIALN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
*1
on the
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 36).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
2
3
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.

Answering calls

When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
27
MREDIALN
MZN
Dial the phone number.
When the other party answers, speak into
the microphone.
When you finish talking, press MZN.
N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 44).
lift it.
MZN
9 a MPAUSEN
Dial the phone number.
2015/11/17 15:14:14
27