Adjusting Depth Of Cut; Bevel Cutting - Makita 5090D Instruction Manual

CUlTlNG ADJUSTMENTS
CAUTION: Remove battery before making any cutting adjustments.
Use only the Makita hex wrench to loosen the bolts.
Adjusting Depth
of cut
To adjust depth of cut:
1.
Using the hex wrench, loosen the
bolt (A) on the depth guide.
2. Move the base up or down.
3. At the desired depth of cut, secure
the base by tightening the bolt (A).
Bevel Cutting
For bevel cutting:
1. Using the hex wrench, loosen the
bolt (A) on the depth guide.
2. Loosen the bolt (6) on the bevel
scale plate.
3. Set the desired angle
(OD
-
45")
by tilting accordingly.
4. Tighten bolts (A) and (B) securely.
CAUTION: After adjusting depth of cut and bevel cutting angle, be sure to tighten the
bolts (A) and (6) securely.
Sighting
For straight cuts:
1.
Align the edge of the base with
your cutting line on the workpiece.
For 4 5 O bevel cuts:
1. Align the notch in the front of the
base with your cutting line on the
workpiece.
12