Epson EPL-N2500 Quick Reference Manual page 5

Check Paper Type
The media loaded in the printer does not
match the paper type setting in the printer
driver. Media that matches only the paper
size setting will be used for printing.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
Collate disabled
Printing by specifying the number of copies
is no longer possible due to a lack of memory
(RAM) or free disk space on the optional
Hard Disk Drive. If this error occurs, print
only one copy at a time.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
Cooling Down
The printer lowers its temperature to
optimize for the fixing toner. Wait for a
moment for Ready to appear in the LCD
panel.
DM Error 001
The Duplex Unit has become separated from
the printer. Turn the printer off, reinstall the
Duplex Unit and turn the printer on again.
Duplex Mem Overflow
There is not enough memory for duplex
printing. The printer prints only on the front
and ejects the paper. To clear this error,
follow the instructions below.
EPSON EPL-N2500 Quick Reference
If Off is selected as the Auto Cont setting on
the control panel's Setup Menu, press the N
Start/Stop button to print on the back of the
next sheet, or press the
to cancel the print job.
If On is selected as the Auto Cont setting on
the control panel's Setup Menu, printing
continues automatically after a certain
period of time.
Duplex Unit Open
The Duplex Unit's cover is open.
Form Feed
The printer is ejecting paper due to a user
request. This message appears when
pressing the N Start/Stop button once to
make the printer offline, and then holding
down the N Start/Stop button for more than
2 seconds in order not to receive form feed
command.
Image Cart ID Error
The wrong imaging cartridge has been
installed. Replace it with the correct imaging
cartridge for this printer. See the Reference
Guide for instructions.
Image Optimum
There is insufficient memory to print the
page at the specified print quality. The
printer automatically lowers the print
quality so that it can continue printing. If the
quality of the printout is not acceptable, try
simplifying the page by limiting the number
of graphics or reducing the number and size
of fonts.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
Status and Error Messages (2/5)
Cancel Job button