Chicco Oasys 1 Instructions For Use Manual page 27

ADJUSTING THE INCLINATION OF THE
CHILD CAR SEAT
The child Car seat can be reclined to 5
positions.
To adjust the inclination of the child Car
seat, pull the lever located under the seat
towards you (Fig. 22).
WARNING! After adjusting the child Car
seat to the desired position, first release the
lever, and then continue to move the seat
until a click is heard, indicating that the lever
is locked correctly.
WARNING! During
operations, ensure that no mobile parts
come into contact with the child or other
children in the car.
MAINTENANCE
The cleaning and maintenance operations
must only be carried out by an adult.
HOW TO CLEAN THE FABRIC COVER
The child Car seat's fabric cover can be
removed and cleaned by hand or in a
washing machine at 30°C. Please refer to the
care label for instructions on cleaning the
seat fabric.
Machine washable at 30°C.
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Never use abrasive detergents or solvents.
Do not spin dry the fabric cover, let it dry
without wringing it.
The fabric cover must only be replaced
with another cover approved by the
manufacturer, since it is an integral part of
the adjustment
the child Car seat and, therefore, one of its
safety elements.
WARNING! To ensure the safety of the child
Car seat, never use it without its fabric cover.
Now remove the cover following the
instructions below:
1. press the restrain harnesses adjustment
button and, at the same time, hold the
two harnesses of the child Car seat,
located under the shoulder straps, and
pull in your direction to loosen them
(Fig. 23);
2. unfasten the restraint harness, pressing
the red button on the buckle (Fig. 24);
3. remove the cover starting from the
reclining button at the bottom (Fig. 25);
4. release the Press Studs located in the
centre of the backrest (Fig. 26), then
remove the seat fabric from the child
Car seat;
5. repeat this procedure for the other strap
(Fig. 27);
6. remove the seat fabric cover from the
side (Fig. 28) and the top (Fig. 29);
7. remove the headrest cover by opening
the buttons on the back (Fig. 30).
To replace the fabric cover, perform the
above operation in the reverse order from
7 to 1.
HOW TO CLEAN THE PLASTIC OR METAL
PARTS
Clean the plastic and coated metal parts
with a damp cloth only. Never use abrasive
detergents or solvents. The movable parts
of the child Car seat must not be lubricated.
CHECKING THE CONDITION OF THE
COMPONENTS
It is recommended to regularly check the
condition of the following components to
ensure that they are not damaged or worn
out:
• lining: check that the padding does not
come out from the seams. Check the
condition of the seams: they must always
27