Chicco Oasys 1 Instructions For Use Manual page 25

Hide thumbs Also See for Oasys 1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 23
D. Harness adjustment button
E. Harness adjustment strap
F. Harness fastening/ unfastening buckle
G. Lining
H. Padded leg divider
I. Car seat base
J. Seat of Car seat
K. Tensioner
L. Recline adjustment lever
Fig. 2 (Back)
M. Headrest adjustment button
N. Homologation label
O. Clamp
P. Compartment to store instruction booklet
FIG. 3 (PROFILE)
Q. Upper belts guide
R. Lower belts guide
S. Installation guide label
LIMITATIONS AND REQUIREMENTS FOR
USE CONCERNING THE PRODUCT AND
VEHICLE'S SEAT
WARNING!
Strictly
following limitations and requirements for
use concerning the product and vehicle's
seat: safety will no be guaranteed otherwise.
• The child's weight must be between 9 kg
and 18 kg.
• The Car seat can be installed on the front
seat, passenger side, or on any of the rear
seats, and always positioned in the driving
sense. Never use this Car seat on seats
facing the sides or opposite to the driving
sense (Fig. 4).
• The vehicle's seat must be equipped with
3-point safety belt, whether static or with
winder, homologated according to UN/
ECE Regulation no. 16 or other equivalent
standards (Fig. 5).
WARNING! According to accident statistics,
vehicles' rear seats are generally safer
than the front seat: therefore, we suggest
installing the Car seat on the vehicle's rear
seats. In particular, the safer seat is the rear
central one, if featuring a 3-point belt: in this
comply
with
the
case, we suggest positioning the Car seat on
the rear central seat.
If the Car seat is positioned on the front seat,
for further safety, we suggest pushing the
seat as far back as possible, depending on
the presence of other passengers on the
rear seat, and adjust the back in upright
position. If the car features a belt height
regulator, secure the latter in the lowest
position. Then, make sure that the belt
regulator is positioned far back (or aligned)
compared to the back of the vehicle's seat.
If the front seat is equipped with front
airbag, we suggest installing the Car seat
on this seat. Always refer to your vehicle's
instruction manual when installing the Car
seat on any seat protected by airbag.
WARNING! Never install the Car seat on a
vehicle's seat featuring only horizontal belt
with two anchoring points (Fig. 6)
Make sure that the buckle of the car's
three-point belt is not too far up (Fig. 13).
Otherwise, try to install the Car seat on
another vehicle's seat.
INSTALLATION OF THE CAR SEAT INSIDE
THE VEHICLE
WARNING! Never thread the vehicle's belt in
positions other than those indicated in this
instruction booklet: Your child's safety may
be compromised!
The car seat belts' slots are clearly marked
on the child Car seat with red colour guide
items.
WARNING! These instructions, in the text
and image versions, refer to an installation
on the rear seat, right side. Follow the
same steps to install the Car seat in other
positions.
1. Position the Car seat on the selected
seat.
2. Open tensioner (K) and clamp (O) in the
upper part of the Car seat (Fig. 7)
• Fasten the car seat belt to the seat's buckle
(Fig. 8)
3. Thread the abdominal belt section
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents