Display Messages - Yamaha DTX-Multi 12 Service Manual

DTX-MULTI 12
QQ
3 7 63 1515 0

DISPLAY MESSAGES

Message
Are you sure?
Choose user pattern.
Completed.
Connecting USB device...
Copy protected.
Executing...
File already exists.
File not found.
Illegal fi le.
Illegal fi le name.
Illegal format.
Illegal selection.
Illegal wave data.
TE
L 13942296513
Incompatible USB device.
Invalid USB device.
MIDI buffer full.
MIDI data error.
No data.
No response from USB device.
No wave data.
No unused MIDI note.
Now importing...[EXIT] to cancel.
Now loading...[EXIT] to cancel.
Now recording...
Now saving...[EXIT] to cancel.
Now working...
Overwrite?
www
Pattern stored.
Please keep power on.
.
Please stop sequencer.
Read only fi le.
60
http://www.xiaoyu163.com
This message is displayed to confi rm whether or not you wish to proceed with the selected operation.
This message is displayed if you attempt to perform a pattern management task even though a Preset pattern is
currently selected. Select a User pattern to proceed with the operation in question.
This message is displayed when loading, saving, formatting, and other similar operations have been completed.
This message is displayed when the instrument is busy mounting a USB memory device.
This message is displayed if operations such as wave editing cannot be performed due to the digital audio
source being copy protected.
This message is displayed while the instrument is busy performing formatting or another similar management
task. Please wait until the operation is completed.
This message is displayed if a fi le with the same name as the one you are about to save already exists.
This message is displayed if no fi le of the selected type exists.
This message is displayed if the fi le selected for loading is unsuitable either for use with the instrument or for
the current setting area.
This message is displayed if the specifi ed fi le name is not valid.
This message is displayed if the standard MIDI fi le (SMF) you are attempting to import is of Format 1. Please
select an SMF of Format 0 to proceed.
This message is displayed if an operation cannot be performed in accordance with the settings made.
This message is displayed if the audio fi le you are attempting to import is of an unsupported format.
This message is displayed if an unsupported USB device is plugged into the instrument's USB TO DEVICE
port.
This message is displayed if the plugged-in USB memory device is not usable in its current condition. As long
as the device contains no irreplaceable data, it should be formatted to make it usable.
This message is displayed if the amount of MIDI data received is too large to process.
This message is displayed if an error occurs while receiving MIDI data.
This message is displayed if you are attempting to perform a pattern management task even though the selected
pattern contains no data.
This message is displayed if the plugged-in USB memory device fails to respond.
This message is displayed to you are attempting to perform a wave management task even though no wave data
exists.
This message is displayed upon execution of a copy-pad operation if no unused MIDI notes are available.
This message is displayed while the instrument is busy importing wave data.
This message is displayed while the instrument is busy loading a fi le.
This message is displayed while the instrument is busy recording a pattern.
This message is displayed while the instrument is busy saving a fi le.
This message is displayed while the instrument is tidying up after importing a wave or after you press the [EXIT]
button to cancel a load or save operation.
This message is displayed when saving fi les to confi rm whether or not you wish to overwrite a fi le of the same
name already present on the USB memory device.
This message is displayed to confi rm that the selected pattern has been successfully stored.
x ao u163
This message is displayed while the instrument is busy writing data to its fl ash ROM. The instrument should
y
never be turned off while in this state. If this precaution is not observed, user data may be lost or the internal
system may be damaged, rendering the instrument unable to startup normally when it is next turned on.
i
This message is displayed to remind you to stop pattern playback before performing the selected operation.
This message is displayed if you are attempting to perform a fi le operation using a read-only fi le.
2 9
8
Full meaning
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9