Jumpers And Connectors; System Board Jumper Settings - Dell PowerEdge R420xr Owner's Manual

Jumpers And Connectors

System Board Jumper Settings

For information on resetting the password jumper to disable a password, see Disabling A Forgotten
Password.
Table 5. System Board Jumper Settings
Jumper Setting
PWRD_EN
NVRAM_CLR
(default)
(default)
Description
The password feature is enabled (pins 2–4).
The password feature is disabled (pins 4–6). iDRAC
local access is unlocked at the next AC power
cycle.
The configuration settings are retained at system
boot (pins 3–5).
The configuration settings are cleared at the next
system boot (pins 1–3).
6
101