Reset Button - NETGEAR FS 726 User Manual

Reset Button

A reset button is located on the front panels of the FS726 and FS750 Switches. The
button allows you to reinitialize the switches after you either insert or remove a module
from a module bay. To activate the Reset button, insert a small wire, such as a paper
clip, into the hole and gently push. As the switch reinitializes, all of the LEDs will
extinguish, then light up for approximately one second during the self-test, and then
return to their normal state. The switch will then operate as normal with the new
bay configuration.
physical description 2-7