10/100 Mbps Rj-45 Ports; Figure 2-2. Front And Back Panels Of The Fs750 Switch - NETGEAR FS 726 User Manual

Front Panel of the Model FS750 Switch
Mode LEDs
Link LEDs
Power
LED
LED Mode Reset
Button Button
Rear Panel of the Model FS750 Switch

Figure 2-2. Front and Back Panels of the FS750 Switch

10/100 Mbps RJ-45 Ports

As Figures 2-1 and 2-2 show, the FS726 Switch has 24 RJ-45 ports, while the FS750
Switch has 48 RJ-45 ports. These are auto-sensing 10/100 Mbps ports: when you
insert a cable into an RJ-45 port, the switch automatically detects the maximum speed
(10 or 100 Mbps) and duplex mode (half- or full-duplex) of the attached device, and
displays this information using the front panel 100 Mbps and FDX LEDs for that port
(LEDs are described in the next section). The 10/100 Mbps ports support only unshield-
ed twisted-pair (UTP) cable terminated with an 8-pin RJ-45 plug.
10/100 Mbps
ports Module Bays
physical description 2-3