NETGEAR WNR834Bv2 Setup Manual page 6

To prepare your router for installation:
Carefully peel off the protective film covering both sides of your router (see
1.
Figure 1
Set up your wireless router by inserting the tabs of the stand (supplied with your router) into
2.
the slots on the bottom of your router as shown in
covering the LED panel of the router.
Figure 2
3. Place your router in a suitable area for installation (near an AC power outlet and accessible to
the Ethernet cables for your wired computers).
To ensure proper heat dissipation and for router stability, it is important that you
connect the stand and place your router in an upright position.
2
Figure 2. Then, remove the protective film
Getting to Know Your Wireless Router
Figure 1).