NETGEAR WNR834Bv2 Setup Manual page 21

C
Figure 8
Locate the Ethernet cable (D) that is attached to your computer (see Step 3). Securely insert
6.
that cable into a LAN port on the router, such as LAN port 1 (E), as shown in
D
Figure 9
Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC into
7.
one of the three remaining LAN ports.
When your network cables are connected as shown in
network. Start your network in the correct sequence, as described below.
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
Installing Your Router Manually (Advanced, Mac, and Linux Users)
E
Figure 9, you are ready to start your
Figure 9.
17