Displaying The Administration Screen - Sony UP-CR20L User Manual

printouts ejecting quickly out of the output slot while
printing.
To attach the output cover
Displaying the
Administration Screen
Proceed as follows to display the administration screen.
Notes
• Before you can make settings on the administration
screen, you must enter the administrator password. In the
factory default condition, the administrator password is
set to "9999."
• If a memory card is inserted in any of the front-side
memory card slots of the unit, the administration screen
does not come up. Remove any memory cards first, and
then repeat the procedure.
1
At the Start Guide display, touch the top left corner of
the screen twice in succession.
The password entry screen appears.
2
Enter the administrator password using the numeric
keypad.

Displaying the Administration Screen

29