Hitachi NR 65AK Service Manual page 39

Insert the Nail Rail [57] and two Guide Plates [58]
into the Magazine [74]. Align the holes of the
Magazine [74] with the holes of the Nail Rail [57] and
the screws of the Guide Plates [58] (Fig. 38) and
secure them with seven Hex. Socket Hd. Bolts
(W/Flange) M4 x 6 [78] (Fig. 39).
Mount the Hex. Socket Hd. Bolts (W/Flange)
M4 x 6 [78] as shown in Fig. 40.
Do not mount the Hex. Socket Hd. Bolt
(W/Flange) M4 x 6 [78].
Mount the Hex. Socket Hd.
Bolt (W/Flange) M4 x 6 [78].
To mount the Magazine Cover [71] to the Magazine [74], mount
the Nail Gate [72] to the Magazine Cover [71] and insert the Shaft
[59] into the hole of the Magazine Cover [71] then secure them
with the Machine Screw M5 x 20 [73] and the Machine Screw
(W/Washer) M5 x 16 (Black) [70] (Fig. 41).
After reassembly, check that the Nail Gate [72] can be moved
when the nail feeder ass'y is moved to the front, and the Nail
Gate [72] cannot be moved when the nail feeder ass'y is moved
backward.
Hex. Socket
Hd. Bolt [78]
Do not mount the Hex. Socket Hd. Bolt
(W/Flange) M4 x 6 [78].
Fig. 40
Magazine
Cover [71]
--- 35 ---
Nail Rail [57]
Guide Plate [58]
Magazine [74]
Fig. 39
Magazine [74]
Fig. 41
Hole of
Magazine
Cover [71]