Hitachi NR 65AK Service Manual page 17

(b) When no nails are loaded in the Magazine [74]:
By removing all the nails from the Magazine [74], the Nail Feeder [83] pushes the end of the Shaft [59] toward
the Nose [20] and the end of the Shaft [59] comes off the groove of the Nail Gate [72]. Thus the Nail Gate
[72] can be moved (Fig. 13). Nails of different length can be loaded by moving the Nail Gate [72].
Groove of nail gate
Nail Gate [72]
Shaft [59]
End of Shaft [59]
Nail Gate [72] can be moved.
Nose [20]
Magazine [74]
Nail Feeder [83]
Fig. 13
The following label that lists precautions in the use of the Nail Gate [72] is provided on the Magazine [74].
Ensure that the customers fully understand and follow these precautions before using the tool.
--- 13 ---