Safety Precautions - LG vr5906lm Owner's Manual

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and correctly
to prevent any unexpected risk or damage.
Basic safety precautions
After reading this manual, please keep it in an easily accessible location.
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in prop-
erty damage and/or serious bodily harm or death.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
WARNING
For your safety, do not remove the battery
from the Roboking. If you need to replace the
battery or the Roboking, take it to the nearest
authorized LG Electronics service center or
dealer for assistance.
Failure to follow this warning can cause fire
or product failure.
Make sure the power cord of the home sta-
tion is not crushed under a heavy object or
damaged by contact with sharp objects.
Failure to follow this warning can cause fire or
product failure. If the power cord is broken,
replace it at an LG Electronics customer care
center.
Do not place the home station and
the Roboking near a heating device.
Doing so can cause product deformation,
fire, or product failure.
Do not force the power plug to bend.
Do not use the power plug when it
has been damaged or loosened.
Doing so can cause fire or product failure.
2
Never use the Roboking with a bat-
tery and/or home station from any
other product than the Roboking.
Doing so can cause fire or product failure.
Do not use the Roboking when
candles or fragile objects are placed
on the floor.
Doing so can cause fire or product failure.
Always use a dedicated outlet.
If multiple appliances are connected to an
outlet simultaneously, they can generate
enough heat to cause a fire.
When pulling out the power plug, always
pull it out by grabbing the plug, not the
cord. When pulling out the power plug, do
not to touch the prongs with your fingers.
Doing so can cause an electric
shock.