How To Turn The Power Supply On And Off - LG vr5906lm Owner's Manual

HOW TO TURN THE POWER SUPPLY ON AND OFF.

Turning on the main power supply
To turn the power supply on, turn the Roboking upside down on
a smooth/soft surface and check whether the main power sup-
ply switch is turned on.
If the main power supply switch is turned off, turn on the
switch.
※ When turning on the power switch, do not press the button
located at the upper section of the Roboking. Operation of the
button can be delayed.
※ Turn off the power switch if the Roboking will not be used for
a long period of time, in order to protect the battery.
※ The power switch cover is used for protecting the switch
from the dust. Always keep the cover attached on.
Turning on the power supply
When Roboking is not turned on, press the 'START/
STOP' button for more than 1 second. The power supply
will be turned on with the melody sound.
※ If the power supply is turned on and nothing is done for
ten minutes, the power supply will automatically turn off
to reduce battery consumption.
Turning off the power supply
Press the START/STOP button for two seconds while the
Roboking is turned on. A melody will sound when the
power is turned off. The power will be turned off with the
melody sound.
Tip
• The power can be turned off due to the static electricity during
the operation.
- If the power is turned off, turn off the main power switch and
then turn it back on.
• If the power cannot be turned on, do the following.
- Turn on the power switch and wait for more than 3 seconds.
- Press the 'START/STOP' button when the power switch is
turned on.
- If the power is not turned on or if there is no display but only
the "Ting" sound, put the Roboking on the home station.
- If there is no change even when Roboking is attached to the
home station, press the reset switch located on the rear side
of the home station while the Roboking is attached on the
home station.
14