How To Start And Stop Cleaning - LG vr5906lm Owner's Manual

HOW TO START AND STOP CLEANING

Using the buttons on the Roboking
After the Roboking is turned on, press the START/STOP button to
begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
※ When the 'START/STOP' button is pressed while the power supply
of the Roboking is turned off, the power will be turned on. Press the
'START/STOP' button one more time to clean.
Using the remote control
After the Roboking is turned on, press the START button on the re-
mote control. A melody will sound and cleaning will begin.
Press the STOP button during the cleaning cycle to stop cleaning.
※ The Roboking power supply cannot be turned on by using the re-
mote control if the power of the Roboking is off. When the power is
off, press the 'START/STOP' button on the upper side of Roboking
to turn the power on.
※ When the START button on the main unit or remote control is pressed, Roboking will start cleaning in
'Spatial expansion' mode.
※ During cleaning, collisions can happen when the sensor cannot detect objects because of their shape.
When this happens, the internal impact detecting sensor will avoid the obstacles by using a backward mo-
tion.
※ If the Roboking is set to start cleaning at a location away from the home station, put the device on a flat floor
in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a location
where there are not any obstacles such as curtains or walls within 30 cm (11.8 in) of the Roboking.
Tip
For best results:
• Briefly scan the area to be cleaned for big and small objects that will cause difficulty if vacu-
umed up.
• If cleaning is started when the Roboking is at the home station, the device can rapidly be re-
turned to the home station as the current home position has been accurately read.
15