Identifying The Parts - Breville wake cup vcf042 Instructions For Use Manual

Identifying the Parts

1. Rear cover
2. Water jug
3. Dispensing nozzles and dispensing lights
The dispensing lights come one when your Wake Cup is dispensing hot water.
4. Pull out tray
You can place dirty spoons and used tea bags, etc. in the pull out tray.
5. Water tank cap
The water tank cap must be refitted before use.
6. Light sensor
Controls the display brightness by sensing the ambient light level.
7. Snooze/Lights button
Press for an extra 5 minutes before the alarm repeats. Also used to switch the lights
on or off at any time.
8. Gradual dawn wake up lights
The lights gradually increase their intensity to help you wake more naturally.
9. Control panel
10. Removable stainless steel drip tray cover
11. Removable drip tray
Catches drips and minor overflows. No mess, just lift out and rinse it under the tap.
12. Clock back-up battery (underneath base)
The AA-size battery (not supplied) will back-up the clock in the event of power cuts
or if you need to unplug your Wake Cup for any reason.
13. V acuum flask
Allows you to keep your milk fresh and cool for use with your Wake Cup.
14. Display
15. Alarm icon
Lights up when setting the alarm time or when your Wake Cup is in alarm mode.
16. Dispense button
Puts your Wake Cup into alarm with dispense mode, immediate dispense mode or
cancels dispensing.
17. Alarm button
Used to enter alarm set mode and to cancel the alarm when it has started sounding.
18. Set button
Used during time and alarm programming.
19. Increase button
Used during alarm or time setting to increase values.
20. Decrease button
Used during alarm or time setting to decrease values.
4