Auto Sense - NAD D 7050 Owner's Manual

AUTO SENSE

Auto sense feature enables the D 7050 to wake up from standby mode and
starts operation by selecting OPTICAL 1 source or the last digital source
before going to standby mode.
CONDITIONS FOR AUTO SENSE
•
For Auto Sense to work, Auto Standby must be set to ON with D 7050
going first to network standby mode.
•
If IR Learning with TV remote control is successfully completed and with
D 7050 going to network standby mode, auto sense is activated upon
detection of active digital input only from OPTICAL 1 input.
•
If no IR Learning is conducted, auto sense is activated upon detection
of active input from the last source (limited only to the digital sources,
streaming services or DOCK) before the D 7050 goes to network
standby mode.
ENABLE AUTO SENSE FEATURE
•
While at standby mode, press and hold "4" button of the D 7050 remote
control until o icon at the upper screen wakes up and blinks once.
DISABLE AUTO SENSE FEATURE
• While at standby mode, press and hold "4" button of the D 7050 remote
control until o icon at the upper screen wakes up and blinks twice.
CONTROL IN STANDBY
The continuous connection between the NAD D 7050 app and the D 7050
unit is dependent upon several conditions one of which is the setting of
the app. Ideally, the remote app's "POWER SAVE" setting must be set to "OFF"
to maintain the connection between the NAD D 7050 app and the D 7050
unit. However, the POWER SAVE setting among other app settings can
change depending upon the "Settings" of the Control in Standby feature.
Locate the "Settings" menu of the D 7050 app to access the "Control in
Standby" feature.
iOS
Android
OTHER FEATURES
Control in Standby (Enabled/On)
• Whenever the D 7050 is reset or goes to eco standby mode, the AUTO
SHUTOFF and POWER SAVE app settings are defaulted back to their
factory settings (OFF) when the unit is powered up again.
•
App settings for AUTO SHUTOFF and POWER SAVE before D 7050 is
reset or goes to eco standby mode are disregarded.
Control in Standby (Disabled/Off)
•
App settings for AUTO SHUTOFF and POWER SAVE are always retained
regardless of standby mode.
13