F1] : Battery Voltage Adjustment - FujiFilm FinePix S6000fd Service Manual

4. Adjustments

4-14. [F1] : Battery Voltage Adjustment

<Setup for Battery Voltterge Adjustment>
(1) When adjusting the battery voltage, supply power (5.0V) to the camera from the [Power Cable Jig] before setting the jig
mode.
(2) Always measure input voltage in the vicinity of the DC IN terminal.
(3) When reducing the voltage, adjust the stabilized power supply to ensure that the voltage is not reduced excessively from
the measured point. The adjustment software may produce an error if communication between the adjustment software
and the camera is disrupted. Restart the adjustment software in this case.
FinePix S6000fd/S6500fd
USB
DC JACK
<Step 1>
Select [F1] Battery Voltage Adjustment on the [Adjustment Items Select] screen.
—> The [Battery Voltage Adjustment Preparation] screen appears.
4-34
FinePix S6000fd/S6500fd Service Manual
PC for adjustments and checks
Digital voltmeter
USB cable
Power supply cable jig
Regurated
Power supply