2. Disassembly
(9) Peel off the TAPE CONDENSER.
(10) Discharge the main capacitor.
Take care not to touch the main capacitor terminals
before discharging the capacitor.
(11) Push the connector catch upwards.
(12) Remove the connector (FLASH CONST) in the
direction of the arrow.
(13) Remove the connector (BATTERY CONST) in the
direction of the arrow.
(14) Remove the 4 screws (M1.7 x 2.5).
(15) Push the FLASH PWB ASSY to the right and remove
the AV jack alignment guide. Then pull the assembly
outwards to remove it.
[Notes on Assembly]
Align the bosses for the FLASH PWB ASSY and F CASE
so that they interlock in the correct position.
[Assembly]
Assemble by performing the disassembly procedure in
reverse.
2-6
FinePix S6000fd/S6500fd Service Manual
12
11
J702
10
9
15
13
14