Adjustments; Important Point Before Adjustment; The Handling Of Image Files In Internal Memory - FujiFilm FinePix S6000fd Service Manual

FinePix S6000fd/S6500fd Service Manual

4. Adjustments

4-1.

Important point before Adjustment

4-1-1. The handling of image files in internal memory

This camera has internal memory, image files stored in the internal memory should be handled as described below when the
camera is replaced or repaired.
Take particular care to ensure that the customers images are not erased.
<Procedure for handling images>
When either of following work is necessary, extract as many as possible of the image files stored in the internal memory. Then,
after the camera is repaired or replaced, load the images into the internal memory in the camera before the camera is
returned to the customer.
1. When the replacement camera is provided.
2. When the MAIN PWB ASSY is replaced.
--->When "MAIN PWB ASSY" is replaced, it is necessary to execute "Flash memory reset".
(When the "Flash memory reset" was executed, involve formatting the internal memory.)
<Image file transfer procedure>
I. Procedure when images can be downloaded to a PC
* If an xD-Picture card is inserted, data in the internal memory cannot be backed up.
(1) Back up the images stored in internal memory.
• Create a folder (named and located so as to avoid any confusion with the user's images).
• Without inserting an xD-Picture card, connect the camera to a PC and copy the image files on the removable disk
recognized by the PC to the folder created in the previous step.
• Check that the images can be displayed correctly on the PC.
(2) Return the backed up image files from the PC to the camera.
• Turn the camera on without an xD-Picture card inserted and format the camera's internal memory.
• Without inserting an xD-Picture card, connect the camera to the PC and copy the image files from the folder
containing the images backed up in the previous step onto the removable disk recognized by the PC.
• Check that the images can be displayed correctly on the camera.
• Delete the backup files created on the PC in step (1) (the user's image files).
II. Procedure when images cannot be downloaded to a PC
(1) Back up the images stored in internal memory.
• Insert an xD-Picture card to be used for image backup into the camera and format the card.
• From the SETUP menu, reset the frame numbers.
• Select image copying from the playback menu, select "Camera -> Card" for all the frames and then copy the images.
• Check that the images can be displayed correctly on the camera.
(2) Return the backed up image files from the xD-Picture card to the camera.
• Before inserting the card, format the camera's internal memory.
• Insert the xD-Picture card containing the backed up copies of the user's image files.
• From the SETUP menu, reset the frame numbers.
• Select image copying from the playback menu, select "Card -> Camera" for all the frames and then copy the images.
• Remove the xD-Picture card and check that the images can be displayed correctly on the camera.
• From the SETUP menu, set the frame numbers to the default sequence.
• If the image file numbers have changed, always notify the user in writing that the image file numbers have changed.
4. Adjustments
4-1