NETGEAR RT311 Reference Manual page 80

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
Figure 7-6. Menu 23 - System Password
Enter your previous system password, and press [Enter].
2.
Enter your new system password, and press [Enter].
3.
Enter your new system password again for confirmation, and press [Enter].
4.
You must enter this new password when you want to access the Manager through the serial port or
by a Telnet connection.
If you lose or forget the Manager password, you must clear the configuration of the router as
described in Chapter 11,
password to revert to the default, 1234.
7-14
Menu 23 - System Password
"Troubleshooting." Clearing the configuration causes the Manager
Using the Manager Interface for Initial Router Configuration