Section 6 Compatible Reporting Formats; Formats By Communication Group; Table 6-1: Formats Compatible With The Mx8000-3Ex - Honeywell ADEMCO MX8000 Installation And Operation Manual

Section 6 Compatible Reporting Formats

This section lists all the reporting formats that are compatible with the MX8000–3EX receiver.
Table 6–1 shows the formats that the MX8000–3EX receiver can decode and handshake frequency format
group that accommodates that format (see Section 5.3.6 for line card programming). Each line card can
decode every format listed below; however, a line card can be programmed to prioritize the handshake order
in which that line card will communicate.
6.1

Formats By Communication Group.

Table 6–1 shows which formats fit under the general communication groups and the corresponding
handshake frequency.
Communication
Group
SK 4+2
Sescoa 3+1/Franklin 3+1
Radionics 3+1 Checksum
SK 3+1/3+1 Extended
Tone Burst
4+1/4+1 Extended
Pulse 4+2
ADEMCO Contact ID®,
ADEMCO Contact ID10
ADEMCO High Speed
Acron TouchTone
ADEMCO Express
DTMF
DTMF 4+2
FBII 4+3+1
Westec
Table 6–1: Formats compatible with the MX8000–3EX
Format Name
Sends a 4-digit account and a 2-digit alarm code
up to four rounds.
Sends a 3-digit account and a 1-digit alarm code
up to four rounds in a tone burst format. Each digit
can be programmed from (0-9). Because there is
no standard, this format reports in codes only.
Sends a 3-digit account and a 1-digit alarm code
and a checksum.
Sends a 3-digit account and a 1-digit alarm code
up to four rounds (10-40PPS). Each block of data
(2 rounds). If a second block of data is sent, it will
contain the extended information. The account
number cannot have repetitive digits (333, 888,
etc.).
Sends a 4-digit account code and a 1-digit alarm
code up to four rounds in a pulse format (10-
40PPS).
Sends a 4-digit account code and a 2-digit alarm
code.
Dual Tone Multiple Frequency. The data is
decoded into English account information.
Sends a 4-digit account code and a 2-digit alarm
code up to 9 events per call.
Sends a 4-digit account code and a 1-digit alarm
code. Will send a maximum of 8 events per call.
Sends a 4-digit account code and a 2-digit alarm
code with a checksum.
Sends a 4-digit account code and a 2-digit alarm
code with a checksum.
Sends a 4-digit account code, a 3-digit zone code
and a 1-digit event code.
Sends a 4-digit account code, a 3-digit Dealer
code followed by the event code.
Description
Handshake
Format Group
1400 Hz
2300 Hz
1400 or 2300 Hz
1400 or 2300 Hz
4/1 1400 or
4/1 2300 Hz
1400 or 2300 Hz
1400_2300 Hz
1400 or 2300 Hz
Westec
6–1