Table of Contents
Advertisement
1
2. Press
for handshake sequence menu.
When display flashes on the Hs# (see Figure 5–13).
3. Press the
or
handshake number.
1 = the first handshake tone sent
handshake tone to be sent and so on.
4. When the desired order number is flashing press
The display will start flashing the format group field.
To Change the Format Group:
1. Follow the procedures in Section 5.4.2.
1
2. Press
for handshake sequence menu.
3. Press
until the display flashes on the Format Group field. See Table 5–11 for valid entries.
4. Press the
or
communication format.
5. When the desired format group is flashing press
To Change the Handshake Duration Time:
The handshake duration is the length of time that the receiver will send a handshake tone. See Table 5–11
for valid entries.
1. Follow the procedures in Section 5.4.2.
1
2. Press
for handshake sequence menu.
3. Press
until the display flashes on the Dur field.
4. Enter the desired value from the keypad or press the
duration time.
5. When the desired handshake duration time is flashing press
To Change the Maximum Handshake Wait Time:
The wait time is the amount of time the receiver will wait for data from the reporting panel before
outputting the next handshake sequence. See Table 5–11 for valid entries.
1. Follow the procedures in Section 5.4.2.
1
2. Press
for handshake sequence menu.
3. Press
until the display flashes on the Wait field.
4. Enter the desired value from the keypad or press the
button to change the ordered
2 = the second
button to change the format group. See Table 6–1 in Section 5 for your
Hs=1
Wait=1250 AckDur=0800
<Seq # <=Exit>
Figure 5–14: MX8000–LC3 Handshake Order
ENTER
or
.
MENU
ENTER
or
.
MENU
or
button to change the handshake
ENTER
or
MENU
or
button to change the wait time.
Section 5 – Programming
Gr=1400_2225–2
Dur=0100
Number
.
5–35
Advertisement
Table of Contents
Troubleshooting
