You can adjust the brightness of the LCD monitor.
- [Setup] - [
[242] Troubleshooting
The image in the viewfinder is not clear (models with the
viewfinder).
Move the viewfinder lens adjustment lever until the image appears clearly.
[243] Troubleshooting
The image in the viewfinder is no-longer displayed
(models with the viewfinder).
Close the LCD monitor. Even if the viewfinder is pulled out, no image is displayed in the
viewfinder when the LCD monitor is open.
[244] Troubleshooting
Operations using the memory card cannot be performed.
If you use the memory card formatted on a computer, format it again on this product.
When recording movies with [
that meet the following conditions.
SDHC memory card or SDXC memory card;
Capacity of 4 GB or more with UHS speed class 3:
Use SDHC memory card or SDXC memory card with a capacity of 4 GB or more with SD
General Settings] - [Monitor Brightness] - [Bright].
Troubleshooting
Troubleshooting
Troubleshooting
REC Mode] is set to [100Mbps
Viewfinder
Viewfinder
Memory card
.
], use memory cards