Sony FDR-AX40 How To Use Manual page 194

If this product is brought directly from a cold place to a warm place, moisture may condense
inside this product. This may cause a malfunction to this product.
If moisture condensation occurs
Leave this product for about 1 hour without turning it on.
Where moisture condensation frequently occurs
Moisture may condense when you bring this product from a cold place into a warm place (or
vice versa) or when you use this product in a humid place as follows:
You bring this product from a ski slope into a place warmed up by a heating device.
You bring this product from an air conditioned car or room into a hot place outside.
You use this product after a squall or a rain.
You use this product in a hot and humid place.
How to prevent moisture condensation
When you bring this product from a cold place into a warm place, put this product in a plastic
bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has
reached the surrounding temperature (after about 1 hour).
[214] How to Use
Notes on disposal/transfer the ownership of this product
(models equipped with the internal memory)
Even if you delete all movies and still images, or perform [Format], data on the internal
memory may not be completely erased. It is recommended that you perform [Empty] to
prevent the recovery of your data.
For the network related information on this product, perform [ Network Info Reset] to reset
the connection information.
[215] How to Use
Note on disposal/transfer of the memory card
Even if you [Delete] data in the memory card or [Format] the memory card on this product or
a computer, you may not delete data from the memory card completely. When you give the
memory card to somebody, it is recommended that you delete data completely using data
Additional information
Additional information
Handling of this product
Handling of this product