Language Setting - Sony FDR-AX40 How To Use Manual

1. - [Setup] - [
Descriptions of menu items
On:
Turns on/off this product when opening/closing the LCD monitor.
Off:
Select this setting when you want to close the LCD monitor during recording.
[186] How to Use

Language Setting

You can select the language to be used on the LCD monitor.
1. - [Setup] - [
[187] How to Use
24p Mode (1080 50i-compatible device)
You can record 24p movies with changing the signal format.
1. - [Setup] - [
If you want to return the system to 50i mode, select
screen.
Note
This product reboots each time you change the setting.
When you change the setting, formatting the recording media is required.
When you select [24p Mode], the following settings will be limited.
The movie recording format is limited to 24p, so you can select from the XAVC S 4K, XAVC S HD
and AVCHD formats.
Depending on the connected TV, images may not be played back normally because the video
signal output from this product is in the NTSC format.
You cannot set [
General Settings] - [Power ON w/monitor] - desired setting.
Menu operations
General Settings] - [Language Setting] - desired language.
Menu operations
General Settings] - [24p Mode] -
Frame Rate].
Setup
Setup
in the [Cancel 24p Mode]