Other Wan Options; Connecting Automatically, As Required; Disabling Port Scan And Dos Protection - NETGEAR DGN2000 Reference Manual

2. In the main menu, under Advanced, click WAN Setup to display the following screen.
Figure 5-1
3. Select the Default DMZ Server check box.
4. Type the IP address for that server.
5. Click Apply to save your changes.

Other WAN Options

The WAN Setup screen that is shown in
•

Connecting Automatically, as Required

Usually, this option should be enabled, so that an Internet connection is made automatically,
whenever Internet-bound traffic is detected. If this causes high connection costs, you can
disable this setting.
If this setting is disabled, you must connect manually, using the screen that you access by
clicking the Connection Status button on the Status screen.
If you have an Always on connection, this setting has no effect.
•

Disabling Port Scan and DOS Protection

Advanced Configuration
Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
Figure 5-1 also allows you perform the following tasks:
v1.0, July 2008
5-3