Default Configuration - NETGEAR DGN2000 Reference Manual

Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
Specification
Interface Specifications
LAN:
WAN:

Default Configuration

You can use the Wireless On/Off and WPS buttons located on the side panel of your router to reset
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and
hold the Wireless On/Off and WPS buttons simultaneously for 6 seconds. Your router will return
to the factory configuration settings shown in the following table.
Feature
Router Login
User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet Connection
WAN MAC address
WAN MTU size
Port speed
Local Network (LAN)
Lan IP
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
A-2
Description
10BASE-T or 100BASE-Tx, RJ-45
ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
ITU Annex A or B
ITU G.992.5 (ADSL2+)
Default Behavior
http://www.routerlongin.com
admin
password
Use default address
1500
Autosensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
v1.0, July 2008
Technical Specifications