Panasonic SA-BT235P Service Manual page 81

Step 9 Twist the Wire Clampers to release 6P cable (SMPS
P.C.B. to D-Amp P.C.B.) & 10P cable (SMPS P.C.B. to Main
P.C.B.).
Step 10 Remove 5 screws.
Caution: During releasing of the P.C.B. Spacer, avoid
touching the electrical components.
Step 11 Release P.C.B. Spacer by using long nose plier.
Step 12 Flip the SMPS P.C.B. and position it according to dia-
gram shown.
Step 13 Proceed to check and repair SMPS P.C.B..
81