Step 2: Attaching The Machine - Roland Texart XT-640 Setup Manual

4. Assembly and Ink Filling

Step 2: Attaching the Machine

Procedure

Place the machine on the stand.
Arrange the stand so that the bent side of the tabletop plates (

Tighten the bolts in the two locations on the back and then in the two locations on the
bottom in the order of
First tighten the bolts temporarily in the order of
the same order.
Tighten
temporarily
Bolts: 8
Washers (silver): 8
Tighten
fully
14
, to secure the machine to the stand
and then
) are to the back.
, and then tighten the bolts fully in