Table of Contents
Advertisement
XE102 Wall-Plugged Ethernet Bridge User Guide
HomePlug Light Not On
If the power light is on but the HomePlug light is not, check the following:
•
Make sure that power is being provided to more than one PowerLine device. Another
PowerLine device must be installed for successful communication across the PowerLine.
•
Verify that the network password is the same on all devices in the PowerLine network.
Ethernet Light is Off
•
Make sure that the Ethernet cable is plugged in properly to a router LAN port.
•
On the attached Ethernet device or network adapter card, check that the Link light is on.
Default Configuration Settings
The following table shows default settings for the XE102 Wall-Plugged Ethernet Bridge.
Table 8. PowerLine Device Default Configuration Settings
Feature
Network
Port Speed
Port Duplex
Administration
Device password
PowerLine
Encryption password
12
Description
10/100 Mbps, Auto-negotiation
Auto-negotiation
Auto uplink
See product label.
HomePlug
v1.0, June 2007
Hide quick links:
Advertisement
Table of Contents
