Wpa-Psk Security - NETGEAR RangeMax WPNT511 User Manual

Rangemax 240 wireless notebook adapter
Hide thumbs Also See for RangeMax WPNT511:
Table of Contents

Advertisement

User Manual for the NETGEAR RangeMax™ 240 Wireless Notebook Adapter WPNT511

WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.
1. Run the WPNT511 Smart Wizard.
a. Make sure the WPNT511 software is installed and the WPNT511 is fully inserted in an
available CardBus slot in your laptop computer.
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
Figure 4-10
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
c. In the Security section, select WPA-PSK [TKIP].
For more information on WPA security, see the Web link to
on page
B-1.
4-14
matches exactly what is configured in the access point.
v1.0, October 2005
"Wireless Communications:"
Network Connections and Wireless Security

Advertisement

Table of Contents
loading

Table of Contents