Wep Encryption Security - NETGEAR RangeMax WPNT511 User Manual

User Manual for the NETGEAR RangeMax™ 240 Wireless Notebook Adapter WPNT511

WEP Encryption Security

Follow the steps below to configure WEP Encryption Security.
1. Run the WPNT511 Smart Wizard.
a. Make sure the WPNT511 software is installed and the WPNT511 is fully inserted in an
available CardBus slot in your laptop computer.
b. Use the
Figure 4-8
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
c. In the Security section, select WEP.
Network Connections and Wireless Security
icon to open the Smart Wizard. The Settings tab page opens.
v1.0, October 2005
4-11