How To Configure Wep Encryption Security - NETGEAR WG511U Double 108 Mbps Wireless PC Card WG511U WG511U User Manual

User's Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U

How to Configure WEP Encryption Security

Follow the steps below to configure WEP Encryption Security.
1. Run the WG511U Smart Wireless Wizard.
Make sure the WG511U software is installed and the WG511U is fully inserted in your
a.
PC.
Open the configuration utility by clicking on the WG511U icon
b.
desktop or in the system tray. The Settings tab page opens.
2. Configure the Network Name (SSID) settings.
Enter the SSID. This is also called the Wireless Network Name.
Tip: Click the Networks tab to view a list of the available wireless networks and their SSIDs.
Configure the WEP settings.
3.
Select the WEP radio button.
a.
Figure 5-1: WEP settings screen
5-4
August 2004
on the Windows
Wireless Security Configuration