NETGEAR WG511U Double 108 Mbps Wireless PC Card WG511U WG511U User Manual page 27

User's Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U
Insert the NETGEAR Double 108 Mbps
Wireless PC Card 32-bit CardBus WG511U.
Locate an available CardBus slot on the
a.
side of your notebook. Hold the PC Card
with the NETFGEAR logo facing up and
insert it into the CardBus slot.
After a short delay, the Found New
Hardware Wizard displays.
Follow the Found New Hardware
b.
Wizard steps, click Finish when done,
and if prompted, restart your computer.
Next, you will be prompted to choose the
c.
country where you are located. Select
your location from the list.
You should see the WG511U system tray
icon on the right in the lower right
portion of the Windows task bar and on
the Windows desktop.
Basic Setup
Found New Hardware Wizard
Note: If Windows warns about a Digital
Signature Not Found, click Yes to continue.
WG511U System Tray Icon
August 2004
3-9