Denon AVR-1712 Owner's Manual page 22

Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey ®
Auto Setup.
1
Use ui to select "Parameter Check" and then press
Auto Setup
Auto Setup Sp. Config. Check
Parameter Check Distance Check
Ch. Level Check
Crossover Check
EQ Check
2
ui
Use to select the item you want to check, then press
or p .
Measurement results for each speaker are displayed.
Sp.Config. Check Check the speaker configuration.
Distance Check Check the distance.
Ch. Level Check Check the channel level.
Crossover Check Check the crossover frequency.
EQ Check Check the equalizer.
• If "EQ Check" is selected, press ui to select equalizing curve ("Audyssey" or "Audyssey Flat") to
be checked.
o p
Use to switch the display between the different speakers.
3
Press RETURN B .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey ® Auto Setup settings
If you set "Restore" to "Yes", you can return to Audyssey ® Auto Setup measurement result (value
calculated at the start by MultEQ ® XT) even when you have changed each setting manually.
Set up speakers (Audyssey ® Auto Setup)
ENTER .
Parameter Check
Sp. Config. Check
Distance Check
Ch. Level Check
Crossover Check
EQ Check
Restore
ENTER
19