Table of Contents
Advertisement
NETGEAR 54 Mbps Wireless PCI Adapter WG311 v3 User Manual
Setting up WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1. Run the WG311 v3 Smart Wizard.
a. Make sure the WG311 v3 software is installed and the WG311 v3 is installed in a PCI slot
in your computer.
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
Figure 2-9
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
c. In the Security section, select WEP.
2-12
v3.0, February 2007
Advertisement
Table of Contents
