Table of Contents
Advertisement
------------ ------
Set 1
Running
NOTE:
The addition of storage will take a minimum of two hours to complete. You will not
be able to complete the next steps until storage is formatted.
6.
Using an SFTP client copy the saved configuration zip file to the config folder on the
appliance.
Using Linux
sftp Admin@<IP_address>
cd config
put <config_filename>.zip
exit sftp
Using a Windows sftp client
Ensure the File Protocol is set to SFTP, not SCP.
Login as Admin.
Copy <config_filename>.zip to config.
7.
Use the following StoreOnce CLI command to check that the file has been uploaded:
config show list
8.
Run the StoreOnce CLI command:
config restore devices <config_filename>
This will restore device settings for the appliance.
9.
After configuration recovery backups can be configured and replication mappings
re-established in order to reverse replicate date back to the appliance (see replication
information in the user guide)
-----
Performing a configuration restore
71
Hide quick links:
Advertisement
Table of Contents
