9.
Re-attach the rear hold-down bracket.
10. Re-install any items that were removed prior to removing the enclosure.
Install the I/O module. See
Install the power supplies. See
(page 57)
Install the fan modules. See
Install the disk drives in the same bays as they were prior to maintenance. See
"Replacing a hot-plug hard disk" (page
11. Reconnect the SAS cables and power cables.
66
HPE StoreOnce 5100 System Capacity Upgrade expansion shelves
"Removing and replacing the I/O module" (page 56)
"Removing and replacing a power supply module"
"Removing and replacing a fan module" (page 58)
50).