Table of Contents
Advertisement
User's Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U
Configuring the Macintosh for TCP/IP Networking
Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On
each networked Macintosh, you need to configure TCP/IP to use DHCP.
MacOS 8.6 or 9.x
1. From the Apple menu, select Control
Panels, then TCP/IP.
The TCP/IP Control Panel opens.
2. From the Connect via box, select your
Macintosh's Ethernet interface.
3. From the Configure box, select
"Using DHCP Server".
4. You can leave the DHCP Client ID box
empty.
5. Close the TCP/IP Control Panel.
6. Repeat this for each Macintosh on your
network.
MacOS X
1. From the Apple menu, choose System Preferences, then Network.
2. If not already selected, select "Built-in Ethernet" in the Configure list.
3. If not already selected, select "Using DHCP" in the TCP/IP tab.
4. Click Save.
Appendix C-16
Preparing Your Network to Work with a Router
202-10065-01
Advertisement
Table of Contents
