NETGEAR WG111U User Manual page 55

User's Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U
Configure the WPA-PSK settings.
3.
Under Security, select the WPA-PSK radio button.
a.
Figure 5-2: WPA-PSK settings screen
Enter the Passphrase (Pre-Shared Key).
b.
Click Apply for the changes to take effect. In the status area at the bottom of the screen,
c.
you will notice the security lock icon change from open and red to closed and yellow.
4. Save your settings in a Profile.
Type a descriptive name in the Profiles field.
a.
Click Save Profile. All the configuration settings are saved in this profile.
b.
Click Apply and click Close to exit the configuration utility.
c.
Wireless Security Configuration
202-10065-01
5-7