NETGEAR WG111U User Manual page 87

User's Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U
1. Open the Network Panel
• If the Network Neighborhood icon is
on the Windows desktop, position your
mouse pointer over it and right-click
your mouse button.
• If the icon is not on the desktop:
— On the Windows taskbar, click the
Start button, point to Settings, and
then click Control Panel.
— Locate the Network Neighborhood
icon and click on it.
The Network panel opens as shown to the
right.
2. Verify the Configuration Settings
a. On the Configuration tab, make sure
that the following components are
installed:
• Client for Microsoft Networks
• Ethernet Adapter
• TCP/IP
b. The Primary Network Logon should be set to Windows Logon.
Preparing Your Network to Work with a Router
202-10065-01
Appendix C-7