Carrier NUI 33AW-CS2 User And Installation Manual page 10

Programming the Control
14. Press the period ( ) button twice. P2 will flash on
the display.
15. To change the hours, press the start time (
button.
16. Press home ( ), away (
17. Press the mode (M) button to set the Zone mode
either ON or OFF.
18. Press hold ( ) button to set the Silent mode either
ON or OFF.
19. Similarly you can program P3, P4, P5 and P6.
20. If you did not select 1 to 7 when you started this
process, then repeat all the steps for your remaining
timeframe choice – 1 to 5, 6 to 7 or individual day :
1, 2, 3, 4, 5, 6, 7
21. To confirm that the thermostat has accepted your
changes, cycle through the six time periods by
pressing days ( ), selecting your time frame – 1 to
7(all days), 1 to 5(weekdays), or 6 to 7(weekends) or
individual day : 1, 2, 3, 4, 5, 6, 7 – and then pressing
the period ( ) button to see the Touch 'N' Go option
assigned for each start time, Zone Mode Setting and
Silent Mode setting. Each time you press period (
you will advance to the next start time.
22. Press OK button or close the lid.
10
)
) or sleep ( ).
),