How To Configure Static Routes - NETGEAR TA612V Reference Manual

Reference Manual for the Broadband Voice Adapter TA612V
Note: The reserved address will not be assigned until the next time the computer contacts the
router's DHCP server. Reboot the computer or access its IP configuration and force a DHCP
release and renew.
To edit or delete a reserved address entry:
Click the button next to the reserved address you want to edit or delete.
1.
Click Edit or Delete.
2.

How to Configure Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Route menu, shown below.
Figure 6-6. Static Route Summary Table
To add or edit a Static Route:
6-12
202-10037-01, March 2005
Advanced Configuration