NETGEAR TA612V Reference Manual page 22

Reference Manual for the Broadband Voice Adapter TA612V
Power
Figure 3-4: Status lights on the broadband voice adapter
Check the broadband voice adapter status lights to verify the following:
d.
• Power: The power light should turn solid green. If it does not, see
Tips" on page
• Test: The test light should be off. The test light blinks when the router is first turned on
then goes off. If after 2 minutes it is still on, see the Troubleshooting Tips below.
• Internet: The Internet port light should be lit. If not, make sure the Ethernet cable is
securely attached to the broadband voice adapter Internet port and the modem, and the
modem is powered on.
• LAN: A LAN light should be lit. Green indicates your computer is communicating at
100 Mbps; yellow indicates 10 Mbps. If a LAN light is not lit, check that the Ethernet
cable from the computer to the router is securely attached at both ends, and that the
computer is turned on.
• Phone: The Phone light will not be lit until your phone service provider provisions the
phone service. Check the user guide from your phone service provider for details on
provisioning the phone service.
3. O
PEN A BROWSER AND LOG IN TO THE ROUTER
For DSL customers, if your Internet service provider had you install software logs you in to the
Internet, do not run that software. If such software automatically starts when you open a browser,
you may need to go to the Internet Explorer Tools menu, Internet Options, Connections tab page
where you can select "Never dial a connection."
From the Ethernet connected computer you just set up, open a browser such as Internet
1.
Explorer or Netscape® Navigator.
3-4
Test Internet Port
3-10.
202-10037-01, March 2005
LAN Port Phone Ports 1 & 2
Connecting the Router to the Internet
"Troubleshooting