Sony xav-7w Operating Instructions Manual page 17

Notes
• The following information is not
shown on the display window:
– List display
– Menu display
• When the monitor is closed, DSPL on
the card remote commander cannot be
used during radio reception.
Display window indication during radio reception
1 2
1 Source type and frequency band
When "Regional" is set to "on", "REG" is shown below
this field (page 23).
2 Preset number
3 Frequency/clock/ATT status/PS name
When "Dual Information" is set to "on", the time is
shown here (page 41).
"ATT" is shown constantly while attenuation is on.
"TA•ON" or "TA•OFF" is shown momentarily here
when pressing TA on the unit.
By pressing the following buttons on the card remote
commander, the corresponding information can be called
up in fields 1 - 3.
DSO: Displays the virtual speakers setting by the DSO (Dynamic
Soundstage Organizer) function (page 34).
The setting changes with each press of the button.
EQ7: Displays the preprogrammed equalizer curve setting by the
EQ7 function (page 35).
The setting changes with each press of the button.
SOUND: Displays the sound characteristics (bass, treble, balance,
fader and subwoofer) settings (page 37).
The displayed setting item changes with each press of the
button, and the B and b buttons can be used to change the
setting.
3
17