File Copy Function; Executing File Copy Function - Fostex PD-6 Owner's Manual

V2.0 Supplementary manual
Depending on the option(s) fitted to the PD-6, the available copy destinations differ, as shown
on the table below.
Only the PD-6 internal hard disk drive (Model
9056) is fitted:
Only the Model EX12 is fitted:
Both the PD-6 internal hard disk drive (Model
9056) and Model EX12 are fitted:
<Note>: You cannot select the copy source drive (or partition) as the copy destination. If
you are going to do so, the error message appears and the display returns to show the
screen for selecting the copy destination.
3) Use the [SEL] dial to highlight the copy destination drive (or partition) and press the [ENTER]
key.
The display now shows the screen for selecting an audio file recorded on the current medium.
4) Use the [SEL] dial to highlight the desired audio file(s) to be copied, and press the
[CIRCLE TAKE] key.
The audio file to be copied is selected and a check mark is placed to its name.
You can select more than one audio file by repeating the operation above.
To deselect the audio file, highlight the file with a check mark and press the [CIRCLE TAKE] key
again (on the screen example below, audio file 002 is selected).
5) After making audio file selection, press the [ENTER] key.
The PD-6 starts file copy to the destination medium (disk or partition).
During file copy operation, the display gives an indication of the time and space remaining for
the operation. When file copy completes, "Completed!" is shown on the display and the PD-6
stops accessing to the disk (or partition).
<Note>: If the available recording space of the copy destination is smaller than the copy
source size, "Over copy size!" is shown and the display returns to the previous screen for
selecting an audio file.
6) Press the [EXIT] key to exit the Utility mode.
"INT DVD", "iP01HD" through "iP27HD"
"INT DVD", "EXT DVD", "eP01HD" through "eP08HD"
"INT DVD", "iP01HD" through "iP27HD", "EXT DVD",
"eP01HD" through "eP08HD"
18